你现在的位置:首页>企业动态>

中空玻璃产品的问题和原因!

浏览:
今年夏天,各种项目陆续开工,中空玻璃的订单也在增加,一些企业也开始计划扩大规模,增加工厂的生产能力,购买一些机械设备来代替手工操作。今天我们来了解一下中空玻璃产品的问题和原因
In the summer of this year, various projects have been started, orders for hollow glass are increasing, and some enterprises are planning to expand the scale, increase the production capacity of the factory, and purchase some mechanical equipment to replace manual operation. Today, let's understand the problems and causes of insulating glass products
1. 中空玻璃里面有雾
1. There is fog in the insulating glass
原因l:由于两种密封剂质量不稳定,低分子物质含量高,在太阳紫外线照射下,密封剂在中空玻璃内迁移挥发,形成雾;
Cause 1: due to the unstable quality of the two sealants and the high content of low molecular matter, the sealants migrate and volatilize in the hollow glass under the sun ultraviolet irradiation, forming fog;
原因二:封条破裂;原因3:丁基胶处理4个关节不好;原因4:干燥剂质量差,在阳光照射下,释放低分子量物质,造成雾气。
The second reason is that the seal is broken; the third reason is that four joints are not well treated with butyl rubber; the fourth reason is that the quality of the desiccant is poor, and low molecular weight substances are released under the sunlight, causing fog.
双组份打胶机
2. 中空玻璃冷凝
2. Condensation of insulating glass
原因l:分子筛质量不稳定,吸附能力低;
Reason 1: the mass of molecular sieve is unstable and the adsorption capacity is low;
原因二:一、二章失效;
Reason 2: Chapter 1 and Chapter 2 are invalid;
原因3:这四个连接处理不当。
Cause 3: the four connections are improperly handled.
另外,如果中空玻璃自爆是钢化玻璃大面积自爆,那就是钢化玻璃的质量问题。还建议玻璃尽量磨边,以消除应力,减少玻璃爆裂。
In addition, if the self explosion of hollow glass is a large area self explosion of toughened glass, it is the quality problem of toughened glass. It is also suggested that the glass should be polished as much as possible to eliminate the stress and reduce the glass bursting.

上一篇:双组份打胶机混胶棒的清洗方法!
下一篇:最后一页

  • 官方微信
波克棋牌 波克棋牌 淘宝彩票网 波克棋牌 五福彩票 五福彩票 吉祥棋牌官网 五福彩票 五福彩票 吉祥棋牌